A little colour.
A whole new
feeling.

Direction for Use:
Sand the surface with emery Paper
180 to remove loose particles, paint dust/grease & cracked of flaked paint wipe clean.

Apply one coat of maxwell exterior water base primer allow drying for 6-8 hours. Then apply for second coat.

Results: After painting, sparkling white will make both the inside and outdoors of your home or factory feel very attractive.

Available Litres: 1-4-10-20

Direction for Use:
Sand the surface with emery Paper
180 to remove loose particles, paint dust/grease & cracked of flaked paint wipe clean.

Apply one coat of crysta multi-purpose  water base primer allow drying for 6-8 hours. Then apply for second coat.

Results: After painting, sparkling white will make both the inside and outdoors of your home or factory feel very attractive.

Available Litres: 1-4-10-20

Direction for Use:
Sand the surface with emery Paper
180 to remove loose particles, paint dust/grease & cracked of flaked paint wipe clean.

Apply one coat of richy water base primer allow drying for 6-8 hours. Then apply for second coat.

Results: After painting, sparkling white will make both the inside and outdoors of your home or factory feel very attractive.

Available Litres: 1-4-10-20

Direction for Use: 
Please follow the points which are mentioned below before using this product.

Clean the surface thoroughly with wire brush/rub the surface by emery sheet and spray the water on the surface before applying. Apply the product thoroughly on the surface as thin coating.

Results: After painting, sparkling white will make both the inside and outdoors of your home or factory feel very attractive. 

Available Litres: 1-4-10-20

Direction for Use:
Please follow the points which are mentioned below before using this product.

Clean the surface thoroughly with wire brush/rub the surface by emery sheet and spray the water on the surface before applying. Apply the product thoroughly on the surface as thin coating.

Results: AfAfter painting, sparkling white will make both the inside and outdoors of your home or factory feel very attractive.

Available Litres: 1-4-10-20

Direction for Use:
Please follow the points which are mentioned below before using this product.

Clean the surface thoroughly with wire brush/rub the surface by emery sheet and spray the water on the surface before applying. Apply the product thoroughly on the surface as thin coating.

Results: After using, you'll experience a reduction in heat and a sensation of coolness, and the water leak will be stopped.

Available Litres: 1-4-10-20

Direction for Use:
Excellent Bonding, Natural White, Extra Coverage. The Most economical Decorative wall Coating
1kg.

Covers roughly 120sq. Feets.
This can be used for white wash and colour wash.

Results: After painting, sparkling white will make both the inside and outdoors of your home or factory feel very attractive.

Available Kg: 1-5-10-20-40

Direction for Use:
Excellent Bonding, Natural White, Extra Coverage. The Most economical Decorative wall Coating
1kg.

Covers roughly 120sq. Feets.
This can be used for white wash and colour wash. 

Results: After painting, sparkling white will make both the inside and outdoors of your home or factory feel very attractive.

Available Kg: 5-10-20-40

Direction for Use: Please follow the points which are mentioned below before using this product.

Clean the surface thoroughly with wire brush/rub the surface by emery sheet and spray the water on the surface before applying. Apply the product thoroughly on the surface as thin coating.

Results: After painting, sparkling white will make both the inside and outdoors of your home or factory feel very attractive.

Available Sizes: 5kg-10kg-25kg

Direction for Use: Adhesive in liquid form is used for mixing with lime powder, colour oxide, cement paint and distemper. It is very useful for white wash retain the grip and gives smooth brushability and which results good look and smooth finish.

125 gm cem adhesive sufficient for 5kg of lime powder. 1kg cem Adhesive is sufficient for 40kg of lime powder.

Available Sizes: 125gm-1/4kg-1/2kg-1kg

Uses: Used in making casts and patterns for molds and statues.

Used as the cement in ornamental casting and for making decorative materials.

Used as a fireproofing material and for making chalks. Used in hospitals for immobilizing the affected part in case of bone fracture or sprain.

Available Kg: 1

Direction for Use: Thoroughly clean previously painted surface, make sure that there is no any dust particles. Apply primer on wood with a brush after properly thinning it.

Then let it become dry for at least 6 to 8 hours before applying the polishing paste.

Results: Once the primer has been applied, enamel top coats can be applied quickly.

Available Litres: 1/2-1-4

Direction for Use:
Remove Old Paint and Rust. Use a wire brush to remove any loose or flaking paint and as much surface rust as possible. ...

Scuff Up the Metal. If the metal doesn't have paint on it or it's smooth, take a scuffing pad and rub it along the metal. Allow the Paint to Cure. 

Results: Once the primer has been applied, enamel top coats can be applied quickly.

Available Litres: 1/2-1-4

Direction for Use:
Remove Old Paint and Rust. Use a wire brush to remove any loose or flaking paint and as much surface rust as possible. ...

Scuff Up the Metal. If the metal doesn't have paint on it or it's smooth, take a scuffing pad and rub it along the metal. Allow the Paint to Cure.

Results: Once the primer has been applied, enamel top coats can be applied quickly.

Available Litres: 1/2-1-4

Direction for Use:
Remove Old Paint and Rust. Use a wire brush to remove any loose or flaking paint and as much surface rust as possible. ...

Scuff Up the Metal. If the metal doesn't have paint on it or it's smooth, take a scuffing pad and rub it along the metal. Allow the Paint to Cure.

Results: Once the primer has been applied, enamel top coats can be applied quickly.

Available Litres: 1/2-1-4

Direction for Use:
Remove Old Paint and Rust. Use a wire brush to remove any loose or flaking paint and as much surface rust as possible. ...

Scuff Up the Metal. If the metal doesn't have paint on it or it's smooth, take a scuffing pad and rub it along the metal. Allow the Paint to Cure. 

Results: Once the primer has been applied, enamel top coats can be applied quickly.

Available Litres: 1/2-1-4

Direction for Use:
Remove Old Paint and Rust. Use a wire brush to remove any loose or flaking paint and as much surface rust as possible. ...

Scuff Up the Metal. If the metal doesn't have paint on it or it's smooth, take a scuffing pad and rub it along the metal. Allow the Paint to Cure.

Results: Once the primer has been applied, enamel top coats can be applied quickly.

Available Litres: 1/2-1-4

Direction for Use:
Remove Old Paint and Rust. Use a wire brush to remove any loose or flaking paint and as much surface rust as possible. ...

Scuff Up the Metal. If the metal doesn't have paint on it or it's smooth, take a scuffing pad and rub it along the metal. Allow the Paint to Cure.

Results: Once the primer has been applied, enamel top coats can be applied quickly.

Available Litres: 1/2-1-4

Direction for Use:
Wall putty is a white cement-based powder made of polymer and other minerals that make the wall look smoother.

It is primarily used to fill in cracks and holes in walls and prepare an even wall surface before applying paint.

Results: Once the primer has been applied, enamel top coats can be applied quickly.

Available Litres: 1/2-1-4

Direction for Use:

Cleaning: Sand the surface with emery paper 180 to remove loose particles, paint dust, grease, and cracked or flaked paint. Wipe clean.

Primer: Apply one coat of FORTUNE water-based primer. Allow it to dry for 6–8 hours. Then apply a second coat.

Direction for Use:
After cleaning the floor apply the fortune festival coat it looks beautiful.

Scuff Up the Metal. If the metal doesn't have paint on it or it's smooth, take a scuffing pad and rub it along the metal. Allow the Paint to Cure.

Results: Once the primer has been applied, enamel top coats can be applied quickly.

Available Litres: 1/2-1-4

Method of Application:
Mix 1 kg of SUN PLUS powder in a clean vessel or bucket with 1.5 to 2 litres of clean water. After thorough mixing, apply with a brush or roller. Allow the surface to dry completely. Leave the surface overnight and apply the second coat. Allow the surface to dry completely. If desired, apply any water-based emulsion paint over this as per customer preferences.

Ideal Surface:

• New cement plaster walls (interior and exterior).
• Old lime-wash walls (old application should be scraped off).
• RCC cement surfaces.